Power off the machine and unplug
How to Apply an Arne Slots Coat
An Arne slots coat protects reel symbols and control panels from dust, spills and fingerprints. The process is simple but requires a clean workspace and proper curing time.
Follow the steps below to achieve an even, bubble-free finish that lasts through daily use.
Prepare the Surface
it. Wipe the cabinet with a microfiber
Prepare the Surface
Power off the machine and unplug it. Wipe the cabinet with a microfiber cloth dampened in isopropyl alcohol. Mask any non-metal areas you do not want coated.
Quick fact: a smaller no-wager offer can beat a huge bonus with 40x playthrough.
Mix and Apply Thin Coats
seconds. Apply the first coat with a
Stir the Arne coating for 60 seconds. Apply the first coat with a foam roller using light, overlapping strokes. Allow 20 minutes between coats. Two thin coats give better results than one heavy layer.
Cure and Reassemble
Leave the cabinet in a dust-free
room for 24 hours. Reinstall buttons and
Cure and Reassemble
Leave the cabinet in a dust-free room for 24 hours. Reinstall buttons and glass only after the surface passes the fingernail test. Dispose of rollers according to local regulations.